AMIGA 52 TANDEM DOUBLE
Machine Characteristics
- The Amiga 52 Double is based on the well-known and proven concept of the Amiga series laminators. Thanks to its modular design, the original Amiga is extended with a bottom lamination module that is inserted between the upper lamination module and the sheet separator.
- The machine also allows standard single-sided lamination, which always takes place on the first laminating unit behind the feeder and the laminating film is applied on the top side of the sheet.
- In the case of double-sided lamination, a second laminating unit is activated and laminates the sheet from the underside.
- The side opening and bottom lamination mechanism allows convenient access for operation and maintenance.
Basic configuration
- Feeder:
- Air nozzles and mechanical separators, adjustable guide plates, overlap sensor.
- Laminating Unit:
- Adjustable laminating unit spacers allow processing of thick sheets and window lamination.
- Two laterally adjustable expansion unwind shafts with adjustable brake for film tension
- on the spread roller.
- A pair of height-adjustable and removable spread rollers perfectly smooth and tension
- the film before applying it to the printed material.
- IR heating of the laminating rollers, controlled by a temperature sensor in the cylinder wall, allows precise temperature control.
- The laminating units are equipped with rubber coated pressure rollers.
- The powerful pneumatic pressure system guarantees even pressure and perfect lamination results.
- ”On-the-fly” side-adjustable unwind air expansion shafts.
- Separator & Delivery:
- Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed.
- Built-in film perforator for top side lamination and on-roll perforator for bottom side lamination.
- The cam driven separating roller with adjustable bursting action is complemented by an automatically cycling skew wheel and together they ensure a clean separation of the two laminating films.
- Fixed inclined delivery table with adjustable air nozzles.
- Control system with advanced built-in functions, colour touch screen display complemented by a set of hardware buttons according to the relevant standards.
SW functions included
- Stop on the sheet overlap to avoid waste sheets.
- Zero overlap option allows processing of higher thickness substrates.
- Automatic detection of pressure and temperature drop prevents irregularity in lamination quality.
- The “end of job “function makes it easy to rewind the sheet onto the film reel.
- Job settings memory.
- Built-in internet connection for providing service support.
- Sensor for sheet separation detection and jam detection.
- Intuitive control panel with built-in diagnostics for key fault conditions and troubleshooting instructions.
Options
- Top and bottom preheating of sheets prior to lamination to increase adhesion and print durability.
- Extended life polyurethane pressure roller.
- Teflon pressure roller with non-stick surface prevents double-sided printing or foil sticking
to the surface of the roller. It also significantly reduces the need for cleaning. - Film slitter for top or bottom lamination.
- Additional On roll perforator.
- Accessories for applying effect film with the possibility of applying PSA laminate.
- 1″ unwinding shaft for effect foils.
- Autopilot that monitors sheet and film capacity on the machine. Practical solution especially in plants, where one operator works on several machines.
- Antistatic bar removes static charge from the separator and prevents thin sheets wrapping around the separating roller.
- The air ionizer helps to unload sheets smoothly onto the delivery unit without static charge.
- Jogging table.
- Automatic sheet stacker.
- Roll lift – allows easy handling of spare rolls of laminating film.
Technical specifications
| Parameter | Feeding head |
|---|---|
Max. production speed | 25 m/min (2121 B2 sheets/h) |
Max. output of the feed. head | 8000 sheets/h |
Min. sheet size | 20 × 20 cm |
Max. sheet size | 56 × 80 cm |
Paper weight | 115-600 g/m² |
Paper thickness | Max 0.7 mm |
Max. paper pile height | 52 cm |
Thickness of laminating film | 24-45 µm |
Kind of laminating film | OPP, PET, Nylon |
Time of laminating roll warm up | 3 – 5 minutes |
Sheet overlap accuracy | ± 1 mm |
Dimensions (incl. delivery desk) | 3.40 x 1.02 m |
Air supply | Min. 6 bar |
Consumption of compressed air | 65 l/min |
Max. consumption of compressed air | 95 l/min |
Max. pressing force | 15 kN |
Max. linear nip pressure | 26,8 N/mm |
Max. consumption of electricity | 12 kW |
Power supply | 12 kVA |
Machine weight | 878 kg |
Recommended machine capacity | 100 000 sheets/month |
| Parameter | Feeding head |
|---|---|
| Max. speed of lamination | 25 m/min |
| Max. output of the feed. head | 8000 sheets/h |
| Min. sheet dimensions | 20 × 20 cm |
| Max. sheet dimensions | 56 × 80 cm |
| Paper weight | 115-600 g/m² |
| Paper thickness | Max 0.7 mm (with overlap >0) Max 1.4 mm (with overlap <0) |
| Max. paper pile | 52 cm (max. 300 kg) |
| Thickness of laminating film | 24-45 µm |
| Kind of laminating film | OPP, PET, Nylon |
| Time of laminating roll warm up | Approx. 4 min |
| Sheet overlap accuracy | 0.8 mm |
| Machine dimensions incl. table (lxwxh) | 341 × 1002 × 147 cm |
| Air supply | Min. 6 bar |
| Consumption of compressed air | 65 l/min |
| Max. consumption of compressed air | 95 l/min |
| Max. pressing force | 2 x 15 kN |
| Max. linear nip pressure | 2x 39.4 N/mm |
| Max. consumption of electricity | 10.5 kW |
| Power supply | 6 kVA |
| Machine weight | 878 kg |
| Recommended machine capacity | 100 000 sheets/month |
* Technical parameters of our products are subject to change without prior notice.
* Product pictures/videos may show additional options not included in the standard delivery.