DELTA 56
Machine Characteristics
- The Delta 56 is a future-oriented machine for every print run. Regardless of whether offset printing or digital printing, thick or thin substrates - the machine can grow with your business.
- The long-term reliability and low maintenance costs will pay off. This has been proven by several generations of Delta model, which have been on the market for 25 years.
- Qualified for 24/7 operation. High lamination speed for all kinds of jobs.
Basic configuration
Feeder
- Feeding table with pallet loading possibility from 2 sides. Able to process paper stack
loaded with or without overhang from the pallet. - Laser marker guide for smooth pallet loading into the machine.
- Comfortable automatic down movement of feeding table with double click. Feeder
is equipped with light barrier for operator’s safety. - Komfi double action feeding head for extremely reliable feeding even at high speed
and thin substrates. - Adjustable separation blowers for reliable separation of sheets from the pile
and trouble-free loading of long sheets. - Automatic and precise sheet overlap control with front lay register.
Laminating Unit
- Energy saving multi-zone heating system. You will appreciate especially when running different sheet formats.
- Temperature sensors inside the cylinder for extremely precise heat regulation.
- Polyurethane pressure roller for longer roller life.
- Adjustable device for distancing lamination roller to enable processing thick substrates
and windows lamination. - Adjustable spread roller for perfect smoothing of difficult film before lamination roller.
- External air supply drop detection.
- Airshaft for film unwinding with side fine adjustment during operation.
- Pneumatic brake for film tension on unwind shaft.
- Powerful pneumatic pressure system to ensure excellent laminating results.
Separator & Delivery
- Combined switchable decurling unit (bar and roller) for all kind of difficult substrates.
Position of decurl unit is detected and its position change compensated for the sheet
separation. - Automatic sheet separation using built-in perforator. Pneumatic snapping unit is
electronically controlled with higher comfort of operation. - Adjustable speed of snapping roller for perfect separation of difficult jobs.
- Automatic (pneumatic) skew wheel enables 3 modes of work and therefore increases
reliability of separation when processing wide range of jobs. - Sheet jam detector prevents damages from paper jams.
- Fixed delivery desk.
SW functions included
- Stop on the sheet overlap to avoid waste sheets.
- Zero or minus overlap possibility for processing thick substrates.
- Manual paper loading function for smaller quantities with automatic down movement of feeding table in ergonomical position.
- Automatic pressure and temperature detection to prevent irregularity in lamination quality.
- End of job function for easy rewind of film with the last laminated sheets
- Sensor for sheet separation detection and jam detection.
- Job settings memory.
- Built-in internet connectivity for service support.
Options
- Sheet preheating.
- Film slitter to cut film to the requested width.
- Additional On roll perforator.
- Teflon pressure roller with non-sticking surface.
- Second airshaft for preparation of new film without interruption. This position
on the machine can be equipped with standard airshaft, or with combined shaft
which has also a rewinding function in case of effect foiling. - Integrated Effect foiling device (OTF). Available also in 1″ size.
- PSA bar for pressure sensitive adhesive films processing
- External Effect foiling device (OTF).
- Autopilot enables to leave the machine partly unattended. The machine checks
the amount of film remaining on the reel and signalize when the volume is low.
It also reads the table height and signalize when the stack is low. - Automatic film brake reads the amount of film on the reel with help of ultrasonic
sensor and brakes the reel accordingly to keep the required tension. - Rotary knives for separation without perforating.
- Hot knife for clean separation where no flagging is acceptable for further operations.
- Antistatic bar removes static charge from the separator to avoid thin sheets wrapping
onto the rollers. - Air ionizer for smooth sheets unloading without static charge.
- Jogging table.
- Automatic sheet stacker (pallet stacking).
- Film roll lift for easy handling with laminates.
Technical specifications
| Parameter | Value |
|---|---|
| Max. production speed | 40 m/min (3394 B2 sheets/h) |
| Max sheet size | 56 × 80 cm |
| Paper weight | 115-600 g/m² |
| Machine dimensions (incl. delivery desk) | 3.60 x 1.23 m |
| Min. sheet dimensions | 30 × 22 cm |
| Max. paper pile | 85 cm |
| Thickness of laminating film | 24-50 μm |
| Kind of laminating film | OPP, PET, Nylon |
| Time of laminating roll warm up | 4,5 min |
| Sheet overlap accuracy | ±1 mm |
| Air supply | Min. 6 bar |
| Consumption of compressed air | Max. 120 l/min |
| Max. pressing force | 22,5 kN |
| Max. linear nip pressure | 40 N/mm |
| Power supply | 7,2 kVA |
| Parametr | Hodnota |
|---|---|
| Min. rozměry archů | 20 × 20 cm |
| Max. výška stohu nakladače | 63,5 cm |
| Tloušťka laminovací fólie | 24-50 μm |
| Druh laminovací fólie | OPP, PET, Nylon |
| Doba zahřátí laminovacího válce | Cca. 3 min |
| Přesnost přesahu archů | ±1 mm |
| Vzduchová přípojka | Min. 6 bar |
| Spotřeba tlakového vzduchu | Max. 120 l/min |
| Max. přitlačovaná síla | 22,5 kN |
| Max. lineární tlak v nipu | 43 N/mm |
| Zdroj napájení | 7,2 kVA |
Custom-built solutions
Possibility of individual machine modification based on specific requirements
* Technical parameters of our products are subject to change without prior notice.
* Product pictures/videos may show additional options not included in the standard delivery.